在线聊天
Specifications
Plastic Random TowerMaterial:PP PE PVC PVDF CPVC ect
10 years experience
ISO9001:2008
Plastic Random Tower Packing
Introduction:
Plastic random packing is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60to 150. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc..
Physical & chemical properties of plastic random packing
Performance / Material | PE | PP | RPP | PVC | CPVC | PVDF |
Density (g/cm3) | 0.94-0.96 | 0.89-0.91 | 0.93-0.94 | 1.32-1.44 | 1.50-1.54 | 1.75-1.78 |
Operation Temp. (Degree C) | 90 | >100 | >120 | >60 | >90 | >150 |
Chemical corrosion resistance | Good | Good | Good | Good | Good | Good |
Compression Strength(Mpa) | >6.0 | >6.5 | >7.0 | >6.0 | >8.0 | >10.0 |
We are supplying various random plastic packings as below:
1. plastic pall ring
2. plastic saddle
3. plastic cascade ring
4. plastic conjugate ring
5. plastic foating bill
6. plastic teller rosetter
7. plastic heilex
Plastic teller rosette ring
plastic cascade mini ring
All kinds of plastic random packing
